Showing only: rtmp

Live Streaming with Hardware Acceleration using a Raspberry Pi and RTMP/HLS

If you’ve been following my blog post series on the development of my ever so useful cat cam, powered by a Raspberry Pi, you’ll know I’ve made several attempts at a more stable and scalable streaming solution for my Cat Cam. As it stands today, I’ve been using Motion. While it’s a decent tool, Bandwidth has been my primary concern and I’d like to be able to stream real-time without sucking up what measly bits my ISP gives me if more than a few folks decide to show interest.

So far we’ve tried ffmpeg => ffserver and that turned out exactly how you probably thought it would. Next, I tried swapping ffserver with an Nginx-powered RTMP server. While not an entirely fruitless endeavor, there were some blockages that I just couldn’t get past.

I received a suggestion from a colleague to fire up the Raspberry Pi’s hardware encoder/decoder. Up until yesterday, I didn’t know this was a thing. Shame on me for not looking into it. So that’s what we’re going to cover in tonight’s post: taking some of what we learned from our first RTMP attempt and make the hardware do all the work. With any luck, we should see some real perf gains, possibly enough for live streams to start instantly (which would make web players happy).

Since I felt like including it here would deviate from the purpose of this post too much, I wrote up how to Add RTMP Support to Nginx if you installed it via apt-get like me. If you’re in that boat, take a moment to read over that post then come back to this one.

Setting up ffmpeg to use hardware H.264 encoding used to be a fat challenge, but they’ve since added support to the official codebase. If you followed my original ffmpeg post, you’ll have a recent enough version that includes this code, but we’ll still need to compile it.

What we’re looking for this time is the OpenMAX IL (Integration Layer) acceleration module.

[email protected]:/usr/src/ffmpeg $ sudo ./configure --enable-omx --enable-omx-rpisudo makesudo make install

That’ll take some time, as I’ve said before. You’ll have enough free time on your hands to get make something to eat. Come back in an hour or so and it should be done.

NOTE: If you run into ERROR: OpenMAX IL headers not found, then you’ll need to run

apt-get install libomxil-bellagio-dev

Thanks, lordofduct in the comments for that one!

From this point forward, we’ll be starting ffmpeg similarly to how we did it before but with a slightly different codec.

ffmpeg -i /dev/video0 -framerate 30 -video_size 720x404 -vcodec h264_omx -maxrate 768k -bufsize 8080k -vf "format=yuv420p" -g 60 -f flv rtmp://

I confirmed VLC is able to play the stream, which is excellent, and there are no lag or jitter issues. It’s about 10-15 seconds behind live, which is totally fine.

I was able to set up an HTML5 player using tools from Bitmovin. I’m not entirely happy with this setup, though, as the player isn’t free and only HLS is supported, right now1. In my next post I’ll cover a new idea that came to mind when looking into the coolness of Ruby on Rails 5: WebSockets.

Update July 11, 2017: @HPGMiskin pointed out libomxil-bellagio-bin is not a thing. I’ve pulled that from the optional step for missing OpenMAX headers.

Add RTMP Support to Nginx Installed From Apt

In the process of trying to figure out the best streaming solution for my cat cam, I had to deviate a bit. I combined my RTMP server for my cat cam and Web server for into one and the latter didn’t have the RTMP module installed. This module is required for my attempts to push H.264 video and have Nginx relay it to whomever is watching, cutting down on the bandwidth of my one-to-one reverse proxy setup I have, now.

It’s a pretty straightforward process to re-compile Nginx, but there are a couple extra steps involved if you installed Nginx from a package repo. I’ll be sure to cover these. What we’re doing here is re-compiling a deb package. By going that route, we’ll adhere to the same methods in which Nginx was installed in the first place so we don’t have two competing installs.

Like my other RTMP/Nginx-inspired post, I’m using Ubuntu 16.04 (xenial), so everything will revolve around that.

Before we begin, we’ll want to make sure we’re updated and ready to go:

apt-get updateapt-get upgrade

Next, install software-properties-common if needed then add the nginx/stable ppa.

apt install software-properties-commonadd-apt-repository ppa:nginx/stable

Now we’ll be able to grab the source files from the repo.

cd /usr/srcapt-get build-dep nginxapt-get source nginx

Whatever directory you run that in is where the source and dependency files will appear. I chose /usr/src as that’s where we’ve been working in these previous posts. Mine looks something like this:

[email protected]:/usr/src# ls -altotal 1888
drwxr-xr-x  4 root root    4096 Jul  8 17:20 .
drwxr-xr-x 10 root root    4096 Apr 21 09:56 ..
drwxr-xr-x 10 root root    4096 Jul  8 17:20 nginx-1.10.1
-rw-r--r--  1 root root 1000448 May 31 19:05 nginx_1.10.1-0+xenial0.debian.tar.gz
-rw-r--r--  1 root root    2765 May 31 19:05 nginx_1.10.1-0+xenial0.dsc
-rw-r--r--  1 root root  909077 May 31 19:05 nginx_1.10.1.orig.tar.gz

Let’s move into the source folder and download the RTMP module:

cd nginx-1.10.1/debian/modules/git clone

Back up one directory and open rules in a text editor. I’m using nano. Add the module to the end of the --add-module list under the common_configure_flags or full_configure_flags like so:

[common|full]_configure_flags := $(common_configure_flags) 		


# NEW MODULE BELOW @                        

Now that the module is in, let’s re-compile!

cd cd /usr/src/nginx-1.10.1dpkg-buildpackage -uc -b

Depending on how powerful your server is will determine largely how long this takes. I say go get a beverage and come back in a few minutes.

Once it’s done, you’ll get your set of .deb packages:

cd /usr/[email protected]:/usr/src# ls -al 
total 16088
drwxr-xr-x  4 root root    4096 Jul  8 17:52 .
drwxr-xr-x 10 root root    4096 Apr 21 09:56 ..
drwxr-xr-x 10 root root    4096 Jul  8 17:20 nginx-1.10.1
-rw-r--r--  1 root root   23788 Jul  8 17:52 nginx_1.10.1-0+xenial0_all.deb
-rw-r--r--  1 root root    3756 Jul  8 17:52 nginx_1.10.1-0+xenial0_amd64.changes
-rw-r--r--  1 root root 1000448 May 31 19:05 nginx_1.10.1-0+xenial0.debian.tar.gz
-rw-r--r--  1 root root    2765 May 31 19:05 nginx_1.10.1-0+xenial0.dsc
-rw-r--r--  1 root root  909077 May 31 19:05 nginx_1.10.1.orig.tar.gz
-rw-r--r--  1 root root   43932 Jul  8 17:52 nginx-common_1.10.1-0+xenial0_all.deb
-rw-r--r--  1 root root   35342 Jul  8 17:52 nginx-doc_1.10.1-0+xenial0_all.deb
-rw-r--r--  1 root root  746780 Jul  8 17:52 nginx-extras_1.10.1-0+xenial0_amd64.deb
-rw-r--r--  1 root root 6627998 Jul  8 17:52 nginx-extras-dbg_1.10.1-0+xenial0_amd64.deb
-rw-r--r--  1 root root  471502 Jul  8 17:52 nginx-full_1.10.1-0+xenial0_amd64.deb
-rw-r--r--  1 root root 3806376 Jul  8 17:52 nginx-full-dbg_1.10.1-0+xenial0_amd64.deb
-rw-r--r--  1 root root  333962 Jul  8 17:52 nginx-light_1.10.1-0+xenial0_amd64.deb
-rw-r--r--  1 root root 2428032 Jul  8 17:52 nginx-light-dbg_1.10.1-0+xenial0_amd64.deb

We’ll need to remove Nginx. As long as we don’t purge, the config files will stay in place. It never hurts to get a backup, anyway, though.

apt-get remove nginx [nginx-core]

Now let’s install our newly compiled version of Nginx:

dpkg --install /usr/src/nginx-[common|full]_1.10.1-0+xenial0.amd64.deb

If it didn’t blow up, we’re in decent shape. To be in even better shape, make sure your moduler was installed by running nginx -V. You should see something like the same line you added to the rules file from earlier (probably at the end):



Since we tinkered with Nginx, mark it for version hold so apt-get upgrade doesn’t wipe out our changes:

apt-mark hold nginx-full

That’s all you need to do. Happy sysadmin-ing!

Attempting to Stream a Webcam to an RTMP Server

This a follow up from this article I wrote talking about trying to get ffmpeg + ffserver running the Cat Cam. I abandoned that project and went in search for a new solution. What I came up with was ffmpeg + nginx. Here’s how that worked out.

After a night of streaming failure, I decided I’d give a shot at using ffmpeg to stream to an RTMP server via nginx. RTMP servers are generally pretty basic in that they just relay what they receive to whomever connects. This seems like a pretty straightforward process, from what I can tell. The hardest part would be to get the nginx source bits and compile it with the nginx-rtmp-module. Here’s how we’ll do that.

Quick Side Note

Before we begin, I found out during this process I never compiled ffmpeg with H.264 support. If you didn’t, either, let’s sidetrack for a moment. Run this to find out:

ffmpeg -encoders | grep 264

If H.264 isn’t on the list, then let’s re-compile :

./configure --enable-gpl --enable-libx264
make install

NOTE: If you get an error saying it can’t find the library:

ERROR: libx264 not found

then you’ll need to run (with periods):

apt-get install yasm libvpx. libx264.

Once that’s done, verify ffmpeg has H.264 support and let’s move on.

ffmpeg -encoders | grep 264


Compile & Install

Since we’re getting the generic nginx from source, we’ll need to make sure some libraries are installed. You can always compile nginx without them, but that’s more work, in my opinion, and could lead to problems, later. You might not need all of these, but the Linux system I’m working on was missing most of this; never hurts to share.

apt-get update
apt-get install libpcre3 libpcre3-dev libssl-dev

We’ll need the nginx source. Pick it up here. I used nginx-1.10.1. I’m a fan of newer versions when possible. and it’s been out for a month, now. I suspect it’s stable.

cd /usr/src
tar -xvf nginx-1.10.1.tar.gz

You’ll also need to get the rtmp module, for nginx, as well.

git clone

Once you have both of those, compile!

cd nginx-1.10.1
./configure --add-module=/usr/src/nginx-rtmp-module
make install

Nginx will be installed to /usr/local/nginx.

if you plan on running nginx from the command line and not /usr/local/nginx all the time, you’ll want to create a symbolic link or add the directory to your path. I opted for the link:

ln -s /usr/local/nginx/sbin/nginx /usr/bin/nginx


Now that compiling is out of the way, let’s modify the nginx.conf to add our rtmp bits. Your config file, located at /usr/local/nginx/conf/nginx.conf should look something like this:

rtmp {
  server {
    listen 8081;
    chunk_size 4000;
    # HLSapplication 
    hls {
      live on;
      hls on;
      hls_path /tmp/rtmp_hls;
# HTTP can be used for accessing RTMP stats

http {
  server {listen 80;
  # This URL provides RTMP statistics in XML
  location /stat {
    rtmp_stat all;
    # Use this stylesheet to view XML as web page
    # in browser
    # rtmp_stat_stylesheet stat.xsl;
  # location /stat.xsl {
    # XML stylesheet to view RTMP stats.
    # Copy stat.xsl wherever you want
    # and put the full directory path here
    # root /path/to/stat.xsl/;
  # }
    location /hls {
      # Serve HLS fragments
      types {
        application/ m3u8;
        video/mp2t ts;
      root /tmp;
      add_header Cache-Control no-cache;

events { 
  worker_connections 1024; 

Whatever you set your hls_path, make sure that directory exists. If you have an XML stylesheet (xsl), set that in the location /stat.xsl block, too, and uncomment rtmp_stat_stylesheet.

Kick off nginx and make sure it’s listening on your port:

nginxnetstat -an | grep 8081

If it’s running, you’ll see this:

[email protected]:/usr/local/nginx# netstat -an | grep 8081
tcp 0 0* LISTEN

Now that we have that set up, let’s get a player. I’m opting for JW Player. you can pay money for it, if you want, but you’re really just paying for their service. the Player files are 100% free. This is their official site, but you can also snag it from GitHub.

How you want to implement it is up to you.

Setting Up ffmpeg

Let’s give this another go. The command you can use here is a little more complicated as we’ll need to stream a legitimate video, but here’s the idea:

ffmpeg -i /dev/video0 -framerate 1 -video_size 720x404 -vcodec libx264 -maxrate 768k -bufsize 8080k -vf "format=yuv420p" -g 60 -f flv rtmp://

Breaking this down, we have the following:

-i /dev/video0 – The input stream.

-framereate 1 – The number of frames per second in the feed.

-video_size 720x404 – The size of the final video.

-vcodec libx264 – the H.264 codec we’re using.

-maxrate 768k – The max bitrate ffmpeg will use to compress the video. Naturally the higher the bitrate, the more bandwidth you’ll need.

-bufsize 8080k – The buffer ffmpeg will work with. It’ll need this if it can’t get the video out quick enough.

-vf "format=yuv420p" – The colorspace and raw video data format.

-g 60 – Set the distance between the start and end of the Group of pictures.

-f flv – The container format we’re sending to the server.

-rtmp://… – The absolute URL of the RTMP stream.

We’re Streaming!

At first I was super excited that it started working, but a problem arose, pretty quickly: it’s streaming way behind real time. After about ten minutes, the speed was near 1x, but still not quite there, and I suspect the buffer was quite full. VLC takes about 30 seconds to start playing the video.

At least it’s sort of working, right?

My JW player isn’t able to load the stream, so some tweaks will be needed.

If only…

The RPI3 isn’t strong enough to live-encode H.264. I’d bet lots of dollars that if I had a stronger piece of hardware to work with, It could do it, and this wouldn’t be an issue. I might see what would happen if I used my MacBook as a test.

I really wish I could embed this into my site. JWPlayer isn’t going to ever be happy with the stream the way it is. A thought that came to mind is going back to motion, using my streaming server to capture the mjpeg stream with ffmpeg, then relay it to the rtmp server in a better format.

Stay tuned for part three when I figure out if that’s worth my time.

Johnathan Lyman
Kenmore, WA,
United States
blogging, design, technology, software, development, gaming, photography